Payment & Shipping Terms:
|Speed:||1.00 - 2.00m/s||Elevator Door:||Sider Door|
|Door Knife:||Double||Warranty:||12 Months After Shipping|
|Material:||Steel Plate||Product Name:||Warehouse Cargo Lift Electric Freight Elevator Cargo Lifting Equipment|
|Control:||VVVF Elevator Control System||Keywords:||Goods Lift|
Steel Plate Freight Elevator,
1000kg Load Freight Elevator,
1000kg Load Garage Car Elevator
1000kg Freight Elevator Garage Car Elevator With High Standard
FREIGHT ELEVATORS ARE DESIGNED TO MOVE MATERIALS WITHIN A BUILDING.
Freight elevators usually travel at lower speeds than passenger elevators, but they are built to carry heavier loads and finished to withstand tougher working conditions. We recommend and offer different freight elevator styles based on your desired application and specific requirements. As always, our Team is experienced in customizing standard designs to fit any application.
|Collective selective control||Collective selective controlling without the presence of operator.|
|Hydraulic drive||We fulfill the elevator travel through controlling the liquid flow in the electronic valve.|
|VVVF door operator||Motor rotating speed can be precisely adjusted to get the more gentle and sensitive door machine start/ stop.|
|Reopen with hall call||In the door closing process, press reopen with hall call Button can restart the door.|
|Car stops and door open||The elevator decelerates and levels, the door only opens after the elevator comes to complete stop.|
|Automatic returning to the base station||When the traffic flow is low, elevator without receiving commanding signals will automatically return to the base floor and standby with the door closed.|
|Directly running||Under the operator's control, after the direct running button is pressed, the elevator only runs directly according to the directives from inside the car and does not respond to any calls from outside.|
|Automatic pass without stop||When the car is crowded with the passengers or the load is closed to preset value, the car will automatically pass the calling landing in order to keep maximum travel efficiency.|
|Repeated door closing||If the elevator can not close the door due to certain obstacle or interference, the elevator will reopen or reclose the door until sundries are eliminated.|
|Power on re-leveling||A power failure might cause the elevator to stop between two floors. However, upon recovery of the power, the car automatically moves to the nearest leveling floor.|
|Overload holding stop||When the car is overload, the buzzer rings and stops the elevator in the same floor.|
|Startup protection control||If the elevator does not leave door zone with the designated time after it starts, it will stop the operation.|
|Inspection operation||When the elevator enters into inspection operation, the car travels at inching running.|
|Up/down over-run and final limit protection||The device can effectively prevent from the elevator's surging to the top or knocking the bottom when it is out of control. It results in more safe and reliable elevator travel.|
|Down over-speed protection device||When the elevator's down speed is 1.2 times higher than the rated speed, this device will automatically cut off control mains; stop the motor running so as to stop elevator down at over-speed. If the elevator continues to down at over-speed, and the speed is 1.4 times higher than rated speed, safety tongs act to force the elevator stop in order to ensure the safety.|
|Photocell protection||In the door open and close period, infrared light that covers the whole door height is used to probe the door protection device of both the passengers and objects.|
|Emergency car lighting||Emergency car lighting automatically activated once power failure.|
|Five way intercom||Communication amid car, car top, elevator machine room, well pit and rescue duty room through walkie-talkie.|
|Fire emergency return||If you start key switch in main landing or monitor screen, all the callings will be cancelled. The elevator directly and immediately drives to the designated rescue landing and automatically opens the door.|
|Micro-touch button for car call and hall call||New type micro-touch button is used for operation panel command button in the car and landing calling button.|
Floor and direction indicator inside car
|The car shows the elevator floor location and current travel direction.|
|Floor and direction indicator in hall||The landing shows the elevator floor location and current travel direction.|
|Car ventilation, light automatic shut off||If there is no calling or command signal within the stipulated time, the car fan and lighting will be automatically closed in order to save the energy.|
|Remote shut-off||The elevator can be called to base landing (after finishing the service) through the key and automatically exist the service.|
|Operation control at stations||Through turning the key switch installed on a specific floor (optional), the elevator can be arranged to stop service for a certain floors.|
|Door open time extending||Pressing the specialized button in the car5, which can keep the door open for a certain period of time, is convenient for loading and unloading of goods.|
|Bell||In emergency conditions, if bell button above car operation panel is continuously pressed, electric bell rings on top of the car.|
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.
Contact Person: Mr. Wei Chen